Von den Bing Tischbahnsets kennt man einige gut erhaltente Komplettsets, meistens Personenzüge der verschiedenen britischen Bahngesellschaften, sowie Reichsbahnausführungen und amerikanisierte Züge. Das Güterwagenset 11/935/10 dürfte eines der seltesten Zugsets sein, die Bing (wohl zwischen 1925 und 1928) hergestellt hat.
Da ein Original kaum aufzutreiben ist, habe ich mal ein solches Set nachgebaut.
Ausgestattet habe ich die Packung mit einer LNER Loko und den passenden Güterwagen, natürlich gab es diese Packung zumindest auch als LMS-Version (Katalogabbildung) und es gibt eigentlich keinen Grund eine amerikanische Packung und die GWR Version auszuschließen.
ich muss mal schauen, was ich hier an BING-Tischbahnteilen zu einem sinnvollen Kartoninhalt zusammenstellen kann. In so einem Karton sieht das gleich ganz anders aus.
Zitat... ich glaube, ich brauche auch so einen schönen Karton.
Für welches Set? Gelb oder schwarz? "blue mottled" geht leider nicht
Gruß Patrick
Hallo Patrick,
Dem schließe ich mich an ,.... ich brauche auch so einen schönen Karton.
An den Kartonfarben lässt sich doch die zeitliche Herstellung bestimmen? Waren da nicht zuerst die Schwarzen und am Ende die Gelben? Aber wann waren die Blauen?
Bestellungen zum Kartonbau nehme ich bedingt entgegen, da ich für eine Schachtel mehrere Bastelabende benötige. Wenn Du aber ein dringendes "Schachtelproblem" hast, lass es mich bitte wissen und ich sehe zu was ich tun kann.
danke für die zeitliche Einordnung und dein Angebot, aber das hat sich dann wohl erledigt? Ich bräuchte den Karton für die 11/756/2, aber nachdem es sich um ein sehr spätes Set handelt, ist es sicherlich die "blaue Wolke" Macht nix....
Viel Spaß weiterhin beim Basteln. Gruß, Horst
P.S. ... in Carpenters Buch sieht man ihn auch, eindeutig mit Muster
ja ich denke die 11/756/x Sets sind alle im blauen Wolkenkarton. Man könnte sich mal überlegen, ob man sich da etwas scannt, auf dünnem Papier ausdruckt und dann einen normalen Karton kaschiert. Meine ersten Versuche dahingehend waren allerdings nicht erfolgreich.
Ich halte Dich auf dem Laufenden wenn ich eine Lösung gefunden habe.
Hi Patrick, Congratulations on making a wonderful replica box, it looks as though you may have to go into business ‘making boxes’. As for the blue ‘cloud’ box, I won one some months ago, which had a box that was in need of a lot of repairs. The base had only 2 sides, and the lid had no edges at all. I wasn’t too disappointed as the contents were what I wanted. I had several problems making the right paper coverings. Firstly I took a high specification picture of the blue cloud design, and then copied it on to paper. The next one was that my box was bigger than A3 paper, so had to use more than one sheet per edge, which means there is a join in the paper. The real problem though was that my box was faded quite badly, and so when I glued my replacement paper to the original box, it didn’t quite look right. If however I was to be making a complete box, this wouldn’t be a problem. When making the repairs, I took lots of pics. Some are in my ‘Bildergalerie’ Geoffs Model trains, but I had a lot more on my PC. One of the other problems I had was sticking the paper on to card, as there are often bubbles in the paper, and because the paper is wet with the glue, it tears easily. I have had better results by gluing the paper, facing the paper downwards, and then pushing the card on to the paper. It’s not perfect yet, but I’ll be trying it again soon. One day I might get it right.
Below are some of the pictures I took to show my attempt.
Finally, thanks again to Manuel for showing us the true box set 10. I keep looking, but as yet, I’ve never seen an original. Well done.
Geoff
sg067340 †
hat folgende Bilder an diesen Beitrag angehängt
this looks really great- an excellent job! I am still far away from your skills of making boxes.
Is the high specification picture of the design still available? I tried once to do the same but struggled to match the patterns that seem to have a special sequence.
Patrick, I still have my pics, but I needed a PC programme called Adobe photoshop to do it. What I did was take a small picture of the corner of the box, cut and paste it, and then copy it numerous times. I then turned every other picture the wrong was round so that the left side of the paper matched the right, and the right matched the left. That way you can create a row of matching pics. Once you have a row, flip them over top to bottom, so the bottom matches the top and vice versa. By doing that you can make a whole sheet.
With Adobe, you can airbrush out any marks and stains, providing they aren't anything major.
If you have a problem with it, drop me a line and I'll sort something out for you. My Blue cloud box has faded quite badly so if you (or anyone ) has a box with good colouring, and can send a file through, I could try to make a better job of it.
The condition of the box and the train is very poor but at least it is complete (the lid is still missing but the auction house promised to send it separately)